|
1200 centigrade
high temperature combustion is the solution for environmental
problems.
Being gentle to the earth. Considering
the natural environment.
Ecology is our main concern in our modern society.
But in fact, various industrial waste and household
gargage is remarkably increasing and threatening our
lives.
Ore company, we make the best use of our knowledge
and experiences through industrial waste processing
of oil waste and oily dirt for many years.
We pursue the eco-friendly processing of combustible
waste.
We pursue the fundamental solution for waste problems
in our society.
|
Legal procedure not necessary. Easy
to set up.
The remarkable pointes of our ACE0.5 are;
;Square measure for framing floor is less than 0.5M2
;Processing capacity is 50 KG/hour.
;Therefore the legal procedures for Air Pollution Prevention Act and Special Countermeasure Act for Dioxin type substances are not necessary and easy to set up.
;Furthermore, it conforms to all the regulation figures of for an incinerator which Air Exhaustion Regulating Standards apply to.
Make the occurrence of Dioxin boundlessly closer to zero.
It is said that 1200 centigrade: the intermal temperature of the incinerator is almost impossible for a small type incinerator.
That enable you to incinerate the materials into a molecule level.
Such calorie enable you not only to resolve Dioxin type substances but to prevent the occurrence of CO and other toxic gases which destroy the ozone layer.
Using low cost waste oil as supplemental
fuel
Complete combustion in the combustion room in the furnace and CYCLONE manufactured by CASTABLE with the excellent dust gathering effect.
This enable you to meet the exhaustion regulating standard for smoke elimination by Environmental Agency of Japan.
Unique structure of the combusting space enable you the cmbustion with less smoke and malodor.
And since this reaches the high temperature quickly, it is possible to use low cost waste oil (lubricating oils and oil for deep fry cooking).
You can economize an annual running cost.
Extraordinary endurance and safety
We use the extra high temperature endurable material for making the combusting space which normally used to build a blasting furnace, that enable us an extraordinary endurance comparding with ordinary incinerators.
We also adopt an unique structure for heat insulation and thermal expansion.
Therefore, there is hardly any thermal radiation towards outside the furnace.
And there are less parts which need a replacement and less troublesome parts because the structure itself is simple.
Furthermore, anybody who learn the appropriate waste input procedure and the operating manual can operate this incinerator.
That enable you to minimize the manpower cost.
Complete combustion with less cinder
1200 centigrade high temperature in the combustion room enable you to combust almost every combustible wastes such as intermediate processing waste from manufacturing processes of factories, household combustible garbage or raw garbage from supermarkets.
Especially it is effective for watery wastes such as soiled paper diapers and watery mowed turf and waste producing gasses or cinders.
And remaining ash after incineration is incredibly few.
(It will be 1/3～1/10 comparing with ordinary incinerators in the market.) |
